To set up RAID for non-hot-plug SATA drives:

1. Turn on the monitor and the server.

If the server is already turned on, save your data and close all open applications, then restart the server.

2. During POST, press F10 to launch the PhoenixBIOS Setup Utility.

If you fail to press F10 before POST is completed, you will need to restart the server.

3. In the Setup Utility screen, click the Advanced menu tab.

4. Select the Advanced Chipset Control field.

5. Select the SATA Controller Mode Option field, then press the plus (+) or minus (-) key to set the field value to

Enhanced.

6. Select the SATA RAID Enable field, then press the plus (+) or minus (-) key to set the field value to Enabled.

7. Press F10, then select Yes to save the changes you made and close the Setup Utility.

The system automatically reboots. You will be prompted to enter the HP Embedded SATA Setup Utility.

8. Press F8 to access the HP Embedded SATA Setup Utility.

Para instalar windows debes pulsar F6 y se necesitar una disquetera usb ya que es imposible cargar los controladores a través de un stick usb. Otra solución no probada y mas complicada seria crear un cd propio con Windows y los controladores.